Precision Hardware Parts Processing factory

Precision Hardware Parts Processing factory The following measures are recommended to improve the turning process of titanium alloy thin-walled parts Choosing a more suitable tool Due to the particularity for titanium alloy material, attention should also be paid for tool selection. Generally, the material and geometry of the tool should to be considered when selecting the tool. For stainless steel materials, carbide blades are suitable to avoid excessive friction and bonding problems during cutting. Of course, it is still necessary to make specific analysis on specific problems and select when choosing cutting tools according to corresponding using standards and specifications so as to ensure that the turning accuracy and quality are not affected by cutting tools. Scientific and reasonable selection of machine tools After analyzing the information to material, shape and precision requirement for parts, the relevant staffs determine what kind of machine tool will be selected, which is the task to be done before CNC turning of thin-walled parts. Because different CNC machine tools have different performances in producing different parts, it is the first and key step to ensure a scientific and reasonable selection of machine tools. Of course, it is also necessary to consider the equipment level of the production enterprises themselves to ensure the proper and reasonable selection of machine tools on the basis of their own equipment system. Choosing reasonable cutting parameters The selection for cutting parameters is one of the important factors to evaluate the quality of the process. For thin-walled titanium alloy parts, too much or too small cutting amount will result in surface stress, which will cause deterioration for surface quality of the workpiece, even adversely affect cutting force, cutting heat and increase the degree of deformation. In order to effectively avoid such problems, the operator should select the appropriate cutting parameters during the CNC turning of thin-wall parts. For this reason, the contents needing attention mainly involve, selecting reasonable take-up speed and roughing speed. Achieve control of finishing speed. Select roughing back bits and finishing back bits. For machining, there are many measures to improve the turning process, but due to the particularity of thin-walled parts made of titanium alloy, the processing level should be improved according to the actual production conditions.Precision Hardware Parts Processing factory website:http://www.licometal.com/precision-hardware-parts-processing/